CCNP(Cisco Certified Network Professional) 인증은 네트워크에 관한 전문적인 지식을 갖고 있음을 의미하는 인증입니다.저희 덤프를 사용하셔서 높은 통과률로 많은 손님들이 호평을 아끼지 않습니다.여러분의 IT시험 대비를 위하여 저희 덤프를 소개해드립니다.
시험번호: 642-892
시험이름: Composite Exam
Q&A: 258 Q&As
가격(달러): $ 109.00 $ 89.00 USD
시험문제:
Q&A: 258 Q&As
가격(달러): $ 109.00 $ 89.00 USD
시험문제:
1. Into which two types of areas would an area border router (ABR) inject a default route? (Choose two.)
A. the autonomous system of a different interior gateway protocol (IGP)
B. area 0
C. totally stubby
D. NSSA
E. stub
F. the autonomous system of an exterior gateway protocol (EGP)
Answer: CE
2. Which three restrictions apply to OSPF stub areas? (Choose three.)
A. No virtual links are allowed.
B. The area cannot be a backbone area.
C. Redistribution is not allowed unless the packet is changed to a type 7 packet.
D. The area has no more than 10 routers.
E. No autonomous system border routers are allowed.
F. Interarea routes are suppressed.
Answer: ABE
3. What are the two reasons for the appearance of 0.0.0.0 as the next hop for a network in the show ip
bgp command output? (Choose two.)
A. The network was originated via redistribution of an interior gateway protocol into BGP.
B. The network was defined by a static route.
C. The network was originated via a network or aggregate command.
D. The network was learned via EBGP.
E. The network was learned via IBGP.
Answer: AC
A. the autonomous system of a different interior gateway protocol (IGP)
B. area 0
C. totally stubby
D. NSSA
E. stub
F. the autonomous system of an exterior gateway protocol (EGP)
Answer: CE
2. Which three restrictions apply to OSPF stub areas? (Choose three.)
A. No virtual links are allowed.
B. The area cannot be a backbone area.
C. Redistribution is not allowed unless the packet is changed to a type 7 packet.
D. The area has no more than 10 routers.
E. No autonomous system border routers are allowed.
F. Interarea routes are suppressed.
Answer: ABE
3. What are the two reasons for the appearance of 0.0.0.0 as the next hop for a network in the show ip
bgp command output? (Choose two.)
A. The network was originated via redistribution of an interior gateway protocol into BGP.
B. The network was defined by a static route.
C. The network was originated via a network or aggregate command.
D. The network was learned via EBGP.
E. The network was learned via IBGP.
Answer: AC
4. Which three IP multicast related statements are true? (Choose three.)
A. Multicast addresses 224.0.1.0 through 238.255.255.255 are called globally scoped addresses. They
are used to multicast data between organizations and across the Internet.
B. The multicast address 224.0.0.1 is a globally scoped address that has been reserved for the Network
Time Protocol (NTP) by the IANA.
C. Multicast addresses 239.0.0.0 through 239.255.255.255 are called limited scope addresses. They are
constrained to a local group or organization.
D. Multicast addresses 224.0.0.5 and 224.0.0.6 are limited scoped addresses that have been reserved for
OSPF.
E. Multicast addresses 224.0.0.0 through 224.0.0.255 are used for network protocols on local LAN
segments. Because they are always transmitted with a Time to Live (TTL) of 1, they are never forwarded
by a router.
Answer: ACE
5. Which three IP multicast address related statements are true? (Choose three.)
A. Multicast addresses 224.0.0.0 through 224.0.0.255 are always forwarded because they are transmitted
with Time to Live (TTL) greater than 1.
B. Multicast addresses 224.0.0.5 and 224.0.0.6 are source multicast addresses for OSPF routers.
C. Multicast addresses 224.0.0.13 and 224.0.0.22 are reserved link-local addresses used by PIMv2 and
IGMPv3.
D. Because they would map to overlapping IP multicast MAC addresses, multicast addresses 224.0.1.1
and 238.1.1.1 could not be used together.
E. Multicast address 224.0.1.1 has been reserved for the Network Time Protocol (NTP) by the IANA.
F. The administratively scoped multicast addresses 239.0.0.0 through 239.255.255.255 are similar in
purpose to RFC 1918 private unicast addresses.
Answer: CEF
A. Multicast addresses 224.0.1.0 through 238.255.255.255 are called globally scoped addresses. They
are used to multicast data between organizations and across the Internet.
B. The multicast address 224.0.0.1 is a globally scoped address that has been reserved for the Network
Time Protocol (NTP) by the IANA.
C. Multicast addresses 239.0.0.0 through 239.255.255.255 are called limited scope addresses. They are
constrained to a local group or organization.
D. Multicast addresses 224.0.0.5 and 224.0.0.6 are limited scoped addresses that have been reserved for
OSPF.
E. Multicast addresses 224.0.0.0 through 224.0.0.255 are used for network protocols on local LAN
segments. Because they are always transmitted with a Time to Live (TTL) of 1, they are never forwarded
by a router.
Answer: ACE
5. Which three IP multicast address related statements are true? (Choose three.)
A. Multicast addresses 224.0.0.0 through 224.0.0.255 are always forwarded because they are transmitted
with Time to Live (TTL) greater than 1.
B. Multicast addresses 224.0.0.5 and 224.0.0.6 are source multicast addresses for OSPF routers.
C. Multicast addresses 224.0.0.13 and 224.0.0.22 are reserved link-local addresses used by PIMv2 and
IGMPv3.
D. Because they would map to overlapping IP multicast MAC addresses, multicast addresses 224.0.1.1
and 238.1.1.1 could not be used together.
E. Multicast address 224.0.1.1 has been reserved for the Network Time Protocol (NTP) by the IANA.
F. The administratively scoped multicast addresses 239.0.0.0 through 239.255.255.255 are similar in
purpose to RFC 1918 private unicast addresses.
Answer: CEF
매달에 제시간 업데이트 할테니까 걱정하지 마세요!
저희회사의 홈페이지 바로가기:www.killtest.kr